Dimension "A" from the top of the feed lips to the base of the magazine where the catch grips the magazine is approximately 2-27/32" when measured along the back of the magazine, the depth is approximately 31/32" and the width is approximately 3/8".

This gun will have a pushbutton takedown on the left rear of the receiver

Rigarmi RG 1953 .22Long, blued steel body and floor plate with poly follower, new production non-factory magazine. Limited to stock on hand.

.22Long is OUT OF STOCK

Dimension "A" from the top of the feed lips to the base of the magazine where the catch grips the magazine is approximately 3-1/16" when measured along the back of the magazine, the depth is approximately 1-1/16" and the width is approximately 3/8".

This gun will have a pushbutton takedown on the left rear of the receiver

Rigarmi RG 1953 .22LR (will not fit 22L guns), blued steel body with poly follower and floor plate, new production non-factory magazine. Limited to stock on hand.

The height of this magazine when measured from the top of the feed lips to the base of the magazine along the back is approximately 3-3/4", the depth is approximately 1-1/16" and the width is approximately 7/16".

This gun has a Walther PP type action

Rigarmi Militar .22LR, blued steel body, floor plate and follower, new production non-factory magazine. Limited to stock on hand.

This gun will have a pushbutton takedown on the left rear of the receiver

Rigarmi RG model 1953 in .25ACP (6.35 mm), blued steel construction, new production non-factory magazine. Limited to stock on hand.

OUT OF STOCK

This gun will have the safety at the back of the receiver

Rigarmi RG newer models in .25ACP (6.35 mm), blued steel construction, new production non-factory magazine. Limited to stock on hand.

Rigarmi Pocket .32ACP/7.65mm (gun has a Walther PP type action), blued steel body and follower with poly finger rest, new production non-factory magazine.. Limited to stock on hand.