$7.00 per order flat rate USPS Priority shipping
|
$7.00 per order flat rate USPS Priority shipping
|
|
|
Llama guns are generally not marked with the model, different 9mm models may share the same magazine. Some may be stamped "LLAMA ESPECIAL", while Llama thought many of their guns were special this in not the model and is only used in reference to one older 9mm gun. Please read the descriptions of the different magazines on this page before purchasing.
The model XI may or may not have a serrated ventilated rib on the top of the gun and may be stamped with the importers mark "A.F. Stoeger" The height of this magazine when measured from the top of the floor plate that rests against the base of the gun to the top of the feed lips is approximately 4.45" the depth is 1.4", the magazine is .54" thick.
Llama XI 9mm, this magazine holds 9 rounds, blued steel body, floor plate and follower, the floor plate on this magazine hangs out on the sides, new production non-factory magazine. Limited to stock on hand.
The height of this magazine when measured from the bottom of the floor plate to the top of the feed lips is approximately 4-17/32", the depth is 1-13/32", the magazine is 9/16" thick.
Llama old type 9mm, 9 round, blued steel body, floor plate and follower, the floor plate on this magazine is flush with the sides, factory-slight use. Limited to stock on hand.
The height of this magazine when measured from the top of the floor plate that rests against the base of the gun to the top of the feed lips is approximately 4.54" the depth is approximately 1.39", the magazine is approximately .48" thick.
Llama old type often referred to as an "Especial" 9mm, 8 round, blued steel body, floor plate and follower, the floor plate on this magazine hangs out on the sides, new production non-factory magazine. Limited to stock on hand.
Llama MAX-IICF 9mm, 10 round, blued steel body with poly follower and base, factory part number 10990, new. Limited to stock on hand.
The height of this magazine when measured from the bottom of the floor plate to the top of the feed lips is approximately 4-3/16"
Llama MINI-MAX 9mm, 8 round, blued steel body, floor plate and follower, the floor plate on this magazine is flush with the sides, new production non-factory magazine. Limited to stock on hand. OUT OF STOCK
LLAMA 82 and 87 9mm, pre-ban 15 round, nickel finish with alloy follower, same as factory, made in Italy by MecGar brand-new. Limited to stock on hand. OUT OF STOCK
The height of this magazine when measured from the top of the floor plate that rests against the base of the gun to the top of the feed lips is approximately 4.57" the depth is approximately 1.26", the magazine is approximately .48" thick.
Llama old type wide base 9mm, this magazine holds 8 rounds, blued steel body and floor plate, poly follower, the floor plate on this magazine hangs out on the sides, new production non-factory magazine. Limited to stock on hand. OUT OF STOCK
Photo above is of factory original LLama Model IX-B and MAX-I 9mm, 9 round, factory part number 10027 magazine. The factory "old type" magazine we have listed above may fit many production runs of this gun. |
|
Some replacement gun parts may require fitting or adjustment for proper operation For more information click here
All Content Copyright © Digital Consulting Services Inc. 1994-2010 All rights reserved |
For non-recessed base type guns
For recessed base type guns
