Echasa
Home Up Information Just Ask Links Accessories

$8.50 per order flat rate USPS Priority shipping and handling

 

 

Echasa pistols were made by Echave Arizmendi y Cia in the Eibar region of Spain. Echasa Fast and GZ grips and magazines are listed on this page

 

MAB magazines and grips have their own listing, click here to jump to the page

 

The Echasa GZ in .22LR is listed under Madison, click here to jump to the page

 

The height of this magazine when measured from the base to the top of the feed lips along the back is approximately 3.55", the depth is approximately 1.07", the width is approximately .42".

Echasa Fast .22LR, blued steel body, floor plate and follower, new production non-factory magazine. Limited to stock on hand.

Quantity:
 

Echasa Fast .32ACP (7.65MM), blued steel body, floor plate and follower, new production non-factory magazine. Limited to stock on hand.

OUT OF STOCK

 

The height of this magazine when measured from the base to the top of the feed lips along the back is approximately 3.61", the depth is approximately 1.07", the width is approximately .44".

Echasa Fast .380ACP blued steel body and base, chromed follower, new production non-factory magazine. Limited to stock on hand.

Quantity:
 

 

 

 

Echasa GZ .32ACP (7.65mm), blued steel body, floor plate and follower, new production non-factory magazine. Limited to stock on hand.

Quantity:
 

 

 

Echasa GZ .380ACP, blued steel body, floor plate and chromed follower, factory original as pictured above, used. Limited to stock on hand.

OUT OF STOCK

 

Echasa GZ grip sets for .22LR, .32acp guns .380acp guns are listed under

MAB Echasa. Click here to jump to the page.

 

 

MAB Echasa Fast grip set for 22LR, 32acp and .380acp guns, constructed of a hard black polycarbonate material, new production replacement cast from an original set, as pictured. Does not include screws. Limited to stock on hand.

OUT OF STOCK

 

 

 

Photo above is of an factory original Echasa GZ nickel plated magazine in .32ACP (7.65mm)

 

    The nickel plated .22LR magazine in the top of the 2 photos above has a slightly smaller magazine catch slot and a forward feed fence. The height of the nickel plated magazine when measured from the base to the top of the feed lips along the back is approximately 3.58", the depth is approximately 1.06", the width is approximately .44".

    The height of the blued .22LR magazine in the bottom of the 2 photos above when measured from the base to the top of the feed lips along the back is approximately 3.58", the depth is approximately 1.07", the width is approximately .44".

 

 

Echasa Fast and GZ grips and magazines are listed on this page

 

Some replacement parts may require fitting or adjustment for proper operation

 

For more information click here

 

 

All Content Copyright © Digital Consulting Services Inc. 1994-2016 All rights reserved

 

 

 Website updated 08/24/2016